Acacia facade board

Today wooden facades are not only an important part of architecture but also a symbol of quality and aesthetics. The facade is the face of a house: it makes the first impression and has to stand the test of time for many years. That is why facade materials must meet high standards of quality and strength.

Finger-jointed facade board

Finger-jointed facade board

22x100x4050

HxWxL

4550

UAH/m²

Finger-jointed facade board

Finger-jointed facade board

22x120x4050

HxWxL

4750

UAH/m²

One of the great advantages of acacia for ventilated facades is its exceptional resistance to rot and to attacks by harmful organisms such as fungi, wood-boring insects and wasps. Under the German national standard DIN EN 350-2, acacia is the only European-grown timber with durability class 1–2, so using acacia for facades guarantees that your building stays sound for decades. Before processing, the green boards are air-dried outdoors, then moved to a drying kiln where they dry at low temperatures down to 12–14% moisture while the internal stress is relieved. This moisture level keeps the boards on your facade dimensionally stable. Before finger-jointing, practically every defect is cut out: pith, frost cracks and rotten (dead) knots. The selected blanks are graded Select & Better by colour, grain and the tangential cut (annual rings) towards the face of the board.

Pictogram 1
Pictogram 2
Pictogram 3
Pictogram 4
Pictogram 5

The glued lamellas in a board are 30 to 90 cm long.

Photo of the facade board

The profile edge is bevelled at 30 degrees and the sharp edges are rounded with a 3 mm radius (R-3 mm).

Boards are finger-jointed with weatherproof polyurethane adhesive from the AkzoNobel series Adhesive

Every board is sanded before shipping. Final sanding grit – 100

Additionally:

  • Clip groove machining (included in the price);
  • Board lengths from 4050 to 6200 mm made to order with prepayment;
  • Custom sizes made to order.
Acacia grain 1
Acacia grain 2

Acacia (Robinia, black locust) is a natural, unmodified light-coloured wood whose physical and chemical properties are by nature superior to oak and to plantation-grown tropical species. Its colour ranges from light yellow with a greenish tint to orange with pleasant honey-coloured streaks. Density at 12% moisture is 760 kg/m³ (oak: 690 kg/m³, teak: 670 kg/m³).

Acacia contains natural compounds (tannins, robinetin) that protect it from wood-decay fungi and insects, so unlike most timber it needs no chemical treatment at all.

Black locust (Robinia)
Bees on acacia
Acacia wood does not attract insects

Thanks to robinetin, wood-boring insects and bees do not settle in acacia. The wood resists the growth and spread of fungi and mould.